drain trough specifications

       Body Material 1/4" Polypropylene
       Lid Material 3/8" Polypropylene
       Lint Filter Material 1/4" PVC
       Lint Filter Holes 3/8" Diameter
       Chemical Resistant Yes
       Maximum Water Temperature 200º
       Lid Attached to Body with  Stainless Steel Screws

        Allows washers to be installed in buildings with small drains.
        Filters lint to prevent drains from clogging.
        Troughs include a lid to reduce odors and prevent water from splashing out.
        Lint filter includes an emergency overflow.
        Helps contain excess suds.
        Second lint filter can be installed if required.
        Lid can support human weight.
        The drain outlet can be placed anywhere in the trough including the bottom.
        Can be manufactured up to 24' in length.

       We can manufacture drain troughs of any size. Typical dimensions are 18" wide by 12" high.
       Length will vary according to project.

        Drain Troughs can be designed to accomodate sump pumps (see picture on Installations page).
        Installation of dual lint filters.


       Draintrough Cut Sheet



       3' l x 16" W x 12" H UPS Same Day
       4' l x 18" W x 12" H UPS Same Day
       Greater than 4' L Common Carrier 1 Week